Matte-black 40-yard roll-off dumpster staged on a framed-out residential construction site in Alabaster, framing lumber stacked nearby, hooklift delivery truck visible in the background under bright Colorado daylight

Construction dumpster rental in Alabaster

Need a roll-off for an Alabaster jobsite? A 30-yard container usually covers it; driveway boards protect your surface and swap-outs are included.

Jobsite Roll-off Containers for General Contractors

Our construction fleet runs 20-, 30-, and 40-yard heavy-duty roll-offs across the Alabaster area and Shelby; these units feature reinforced steel sidewalls, walk-in rear swing doors, and steel bottom rollers for framers, roofers, and demo crews to load. We drop every container on protective driveway boards. For multi-phase projects, reach out to review our contractor pricing and tonnage rates.

Matte-black 20-yard roll-off construction dumpster with heavy ribbed steel sidewalls and swing rear doors at a working jobsite in Alabaster, sitting directly on compacted dirt with an unmarked white hauler partially visible at the far edge of the frame.

20-yard construction roll-off

The 20-Yard Roll-Off is 20 ft long, 7 ft wide, 4 ft tall, and holds up to 2 tons of debris in one flat rate.

A 20-yard roll-off handles kitchen and bath remodels, single-room demo, and small framing jobs in tight spaces.

Matte-black 30-yard roll-off construction dumpster sitting directly on the compacted-dirt site of a framed single-family home build in Alabaster, drywall and lumber scrap loaded inside.

30-yard construction roll-off

The 30-yard roll-off runs 22 feet long, 8 feet wide, and 6 feet tall, with about 4 tons of debris included.

The 30-yard container fits whole-house remodels, additions, and new-build framing with high walls for bulky drywall and lumber.

Matte-black 40-yard roll-off construction dumpster being lowered from a white-cab hooklift delivery truck onto the compacted-dirt jobsite at a commercial build site in Alabaster

40-yard construction roll-off

The 40-yard roll-off stretches 22 feet long by 8 feet wide and stands 8 feet tall, with about 5 tons of debris included.

Sized for commercial builds, large tear-outs, and multi-phase jobs, the 40-yard container remains the largest roll-off we stage.

Construction Debris, Drywall, Lumber Acceptance

Our heavy-duty roll-off accepts the full range of mixed C&D debris: framing lumber, drywall, plaster, subfloor, insulation, packaging, pallets, and light metals. Materials are sorted at the Alabaster transfer station—ensuring we follow EPA construction debris recycling guidance. Contractors on active projects often manage their waste using commercial recurring hauling agreements, which keeps the container rotation efficient for the entire job site.

  • Framing lumber and offcuts
  • Drywall, plaster, lath
  • Subfloor and sheathing
  • Insulation and vapor barrier
  • Mixed packaging and pallets
  • Light metals and conduit
Worker in a yellow high-visibility vest tossing framing lumber and broken drywall into a matte-black 30-yard construction roll-off dumpster on an active build site in Alabaster, bright daylight
Low-profile matte-black lowboy roll-off dumpster loaded with broken concrete slab and rebar at a foundation tear-out in Alabaster, skid steer parked beside it, sunny Colorado morning

Concrete, Brick, and Asphalt Heavy-debris Pricing

Dense C&D materials need a container built for weight. Our reinforced-steel lowboy roll-offs handle concrete slab tear-out, brick demo, asphalt millings, and clean dirt loads up to 10,000 pounds per trip. The low, 2-to-3-foot side walls let a skid steer or wheelbarrow roll debris straight in without busting USDOT truck weight limits on Alabaster routes.

Heavy-debris jobs run on weight tickets from the scale house, not by the yard; the cleanest loads—meaning no mixed wood, drywall, or trash—earn the lowest per-ton rate. I size your container and dispatch the dumpster based on a quick call with the site super to track the final tonnage.

Tonnage Limits and Weight Overage Policy

Every construction roll-off comes with an included tonnage allowance; this capacity is set by container size and listed on your upfront quote. Additional weight is billed at our per-ton overage rate against the scale-house ticket—which is why we track every load as it weighs in. You should choose roofing tear-off jobsite containers for shingles: heavy debris will quickly eat through your standard mixed-debris allowance.

20-yard

3 tons

Included tonnage. Mixed C&D debris.

30-yard

4 tons

Included tonnage. Mixed C&D debris.

40-yard

5 tons

Included tonnage. Mixed C&D debris.

On-site Swap-out and Dispatch Coordination

Multi-week jobs run on a swap-out rhythm, not single drops; text or call dispatch when a container is full — we will roll a fresh roll-off to the same staging pad the same or next business day across the Alabaster metro and Shelby.

Step 1

Text dispatch when full

Site supers text the dispatcher a photo and the container number — no portal logins, no ticketing.

Step 2

Same- or next-day swap

We haul a full container and drop an empty on the same pad without losing a loading hour.

Step 3

Weekend dispatch available

Saturday pulls keep Monday starts clean; coordinate Friday afternoon.

Insurance and Contractor Account Setup

Contractor accounts run net-30 with consolidated monthly billing; we issue certificates of insurance to the GC or owner — the hooklift fleet stages recurring containers across active sites in Alabaster, and that means a single dispatcher call spins up the account.